Scroll Down For Patterns & Colors

DuraCoat is a hard polymer that’s self-lubricating to a certain extent; extremely hard, oil, solvent, and wear resistant. It resists 100 inch pounds of direct impact and 80 inch pounds of reverse impact. Its pencil hardness runs H to 2H. DuraCoat has passed a 300 hr salt spray test, which far exceeds military requirements for firearms finishes. Major manufacturers such as DSA utilize DuraCoat finishes on their rifles. DuraCoat has proven to hold up extremely well under field conditions. Even on parts such as FAL bolts, which are subject to significant abrasion as the bolt cycles, DuraCoat has held up well and proven to be extremely durable. DuraCoat will dry to the touch in 20 min and can be used after curing 6 - 8 hrs. However it will continue to cure for 4 to 6 weeks after application. (WE RECOMMEND A MINIMUM 3 WEEK CURE TIME before using in holsters or dragging rifles out through heavy brush.) DuraCoat is not a flash cure application which will become brittle after curing resulting in chipping and flaking. DuraCoat cures slowly so it remains flexible after it cures which contributes to its excellent abrasion and wear resistance. We like to say DuraCoat doesn't wear out, it wears in. DuraCoat can be applied over just about any surface including, metal, plastic, or wood as long as the surface is properly prepared. We have had great success using it on forearm rail covers. A color / pattern is available for any terrain.
DuraHeat is available for parts that will be exposed to extreme heat. This high performance coating is capable of withstanding temps of up to 1800 degrees. DuraHeat is an excellent choice for barrels that will see sustained fire such as LMG barrels or full auto rifle barrel. When exposed to these types of high temperatures DuraHeat becomes even harder and more abrasion resistant.

PATTERNS

DuraHeat Colors

<<<<Back to Main